Further Thoughts on the SX-70

3 02 2014

There was going to be a write up on shooting infrared with the XA2 here, but technical issues meant that I gave up about 6 shots in. What I think the problem was, was having the flash set to ‘full’, which I’ve since read, is a manual setting, and so the inbuilt meter on the XA2 will set the shutter speed as if the flash weren’t attached. Not good in a very dark club. The flash fired for the shots, so I’m hopeful that with the lack of ambient light, there might be a kind of rear curtain flash effect to the shots, and not a total blur. But the experiment is now postponed until next weekend, when I’m at another gig in the same venue, so, we’ll see.

I’m a couple of weeks into shooting with the SX70 now, and I’m completely in love. I’ve stocked up on film, and bought a cable release for it aswell. I’ve had all sorts of ideas, and after kind of recklessly blowing through the first pack, I’m being a little more considerate with my shots now.


When I loaded up the first pack, I was too giddy about playing with it to remember to install the frog tongue which J also got for me. It’s a small piece of rolled back lightproof material, which you load into the front of the camera along with the film pack, providing protection from the light when the shot ejects. Although the more recent Impossible Project film has much improved with regards to sensitivity after exposure, it still takes a little while (30-40 minutes) to fully develop,and during this time, it’s really advisable to keep it out of the light. If I’m home, I slide it into a book or under my laptop. If I’m out and about, I try to remember to have a journal with me to slip it inside in my bag. Failing that, the backing material is just sturdy enough to be safe inside a pocket,if you’re careful.

As it turns out, it’s perfectly possible to install the frog tongue mid-pack, and if my first experience is representative, the only way you can use it. Once I had it installed, and after checking it over, I loaded a film cartridge into the camera, closed it, and waited for the dark slide to eject. Nope. The dark slide jammed halfway out, meaning some jimmying with a narrow screwdriver to slide it back enough to open up the camera again. After checking the positioning of the frog tongue, subsequent efforts yielded the same result. I can’t be certain though if it’s that the dark slide is too thick to eject correctly, or that I had the tongue installed badly to begin with and the second attempts were because the rear of the dark slide had become too mangled for the camera to shove it out. I ended up wasting a shot when I had to discard the dark slide, but beyond that, the tongue has been working very well.



On to the cable release.
I bought one from the Impossible Project, since I was ordering some film anyway. I’ve seen a few DIY tutorials, but at £16 it isn’t expensive, and my electronics skills really aren’t up to much.

It connects to the camera via the two tiny holes to the size of the shutter button. One end is a two pin connector, the other a simple plastic box housing a button, with two metres of cable inbetween.

The only real issue, if you’re using it for self portraits, is focussing correctly. Using flash, the aperture should be firing at around f22, so there’s a little margin for error. I placed a light stand in front to focus on, then positioned myself in its place to take the shot. It seems to have worked out fine.

Excuse the mop hair and owl pyjamas 🙂

Because I am a great lover of fiddling, changing and creating, I’ve since started experimenting with altering the image, in terms of emulsion manipulation, and adding alternative media. There’s something both nerve wracking but also exciting about changing an instant photograph in this way, similarly to the alteration of a negative. You can’t go back once you’ve changed it. Once it’s done, the original is destroyed, to make way for what is a completely new piece.




My ideas have begun to filter into specific project ideas now, and I’m hoping to start working towards my next self-published work, centred around instant film, within the next few weeks, so hopefully my vague experiments will start to take on a little more shape and meaning. The ‘lets try this and just see what happens’ approach is fun, but at around £2.50 per shot, not a sustainable way to work with this film!

For anyone interested, I’m posting my ongoing experiments and general instant shots on Tumblr at Blank Borders.


Soviet Cameras: The FED 3 and Lomo Lubitel 2

1 02 2014

One of my ‘resolutions’ this year was to use the vast information resource that is the internet for interesting, educational means (and less for looking at funny pictures of cats).

So, I’ve set myself monthly research projects. Nothing huge, and no requirement for a massive report on my findings. Just things which interest me, and which I’d like to know more about. Most of them I probably won’t even write about here, since they won’t all have a connection to art or photography, but I found this one interesting enough to post a little of what I’ve learned about two cameras which I own and use myself.

Read the rest of this entry »

Impossible Project SX-70

19 01 2014

I’ve always had a huge soft spot for instant film. From back when you could buy Polaroid in twin packs from Asda for under £20, to the discovery in more recent years of Fuji’s peel apart version for Polaroid 100 series folders. There’s a little bit of a magical feel to it all, and that childlike wonder has never really gone away for me.

It was my birthday recently, and J bought me a camera I’ve lusted after for some time, but never actually used: an SX-70 folding SLR.

I’m a sucker for an innovative design, and the neat way in which Polaroid designed the SX-70 is nothing short of brilliant.

Here she is closed flat for storage.

And open for use, with a flash bar attached.


Bear in mind that this is an SLR camera; there’s a full mirror in that folding package, alongside a focussing mechanism, and good quality lens.

Onto the film. Of course, Polaroid closed shop a few years ago now, so any original film is both pricy, and at least 5 years out of date, so no guarantees even if you do get hold of some.

Happily, The Impossible Project took on the task of reproducing instant film for the SX-70, 600 and Spectra series of cameras a few years back, and are coming along in leaps and bounds.

After a shaky beginning, with unstable emulsion issues, the latest batches (the colour protect versions) seem to be very close to the quality and behaviour of the original films. The issue being, of course, that when Polaroid folded, (pun unintentional), a great deal of the equipment and information was destroyed. This has meant Impossible recreating the emulsions from near scratch, with trial and error. No mean feat, but they’ve done pretty impressively in my opinion.

The first thing I noticed about the SX-70 shots, compared with the 600 I’ve used, is that the image quality appears to be vastly better. I’m assuming that it’s largely due to a combination of much lower ISO sensitivity, flash type, and a better quality lens/camera (my 600 is one of the 90s style rounded box shapes, with the half clamshell front, and even in the early 00s when I bought it new, only cost in the region of £30, with a box of film included). But even the colour cast seems punchier and clearer than the 600, which with flash can lack tonal clarity.


Both those were shot with an original flash bar, the disposable magnesium sort, and you can see that the skin tones are very close to natural, with a lovely soft glow.

I’ve yet to shoot in daylight, flashless, but I think it’s safe to say I’ve got a new favourite camera.

Infrared Flash with an Olympus XA2

26 10 2013

I’ve owned an XA2 for some years now, although after the initial honeymoon period of a new toy to experiment with, it fell out of favour with me for a while. Over the past few months, I’ve been enjoying the simplicity and compact size, and looking once again at testing it’s capability and limitations.

The returning interest in infrared arose from my acquisition of the more powerful A16 flash unit, when replacing my faulty A11. I was reminded of a project posted online some years back, running a series of experiments with infrared flash, using an XA2. It was something J and I were both interested in at the time, although whilst I lost interest quickly, J took it so far as photographing a couple of live bands with IR flash (with great success, although with an SLR and more powerful flashgun).

Read the rest of this entry »

The Long, ‘It’s Been Forever and Here’s Why’ Post

14 09 2013

I considered titling this ‘Art Therapy’, but, rejected that on the grounds that it was too vague. This is certainly the longest, and most personal, post I’m ever going to make on this blog, but rather than leap right back into posting about cameras and techniques without a word about, well, the last 8 or 9 months, I thought I’d write a combination update/things that help when your life’s imploding kind of post.

Read the rest of this entry »

5×4 Pinhole Results

28 01 2013

This should have happened a lot sooner, but for a while, I’d thrown the half finished camera into a corner, having realised that pine is bloody awful to work with. I’d used thinner strips of cherry wood for my 6×6 camera, and going from a thinner hardwood to this pine sheet wasn’t especially pleasant. As a result, the camera is a tad wonky and rough.

But, a couple of weeks ago, I dug it out, sanded it as much as I could be bothered doing, lined any leaky areas with black foam, and gave it a coat of varnish. It’s more or less presentable, and just about does the job.

It’s a 70mm focal length, F195 pinhole. At the moment, the film holder just slots into the back, and is held firm by the foam light sealing. At some point, I intend to add a hinged back, to push the holder more firmly into place, as I do have a slight light leak issue along the ‘open’ side.

2013-01-26 09.30.16

Yep, that’s a beer mat acting as a shutter.

All the photos were shot on Tetenal photographic paper, just slightly smaller than 5×4 on the shorted side (which means being careful about sliding the darkslides back into place, as I discovered when I accidentally lost a shot due to the paper getting caught on the wrong side of the slide upon replacement). The negatives were scanned and inverted in PS. With the exception of some dust removal, and a couple of very minor levels adjustments, all the photos are pretty much as they came out of the camera in terms of exposure.

Read the rest of this entry »

Diana Mini

21 01 2013

So, I generally really hate the snow, but since I didn’t have any driving to do this weekend, it’s been less of a stress influence for me, and I’ve managed to almost appreciate it. (Of course I feel slightly differently now that I have to drive to work in it later tonight).

Few shots taken outside with the Diana Mini. I fastened a red filter over the lens (actually, a Quality Street wrapper secured with elastic, but, whatever).



And one extra from the same roll, taken in Leeds a few weeks ago. Set on bulb, guesstimated exposure, resting on the edge of a bridge.


%d bloggers like this: